GOODRICH CORPORATION

Inspection Type	Planned
Scope	Partial
Safety/Health	Safety
Close Conference	2024-03-06
Emphasis	N: CHEMNEP, P: CHEMNEP
Case Closed	2024-11-04

Related Activity

Type	Inspection
Activity Nr	1732438
Safety	Yes
Type	Inspection
Activity Nr	1732435
Safety	Yes

Violation Items

Citation ID	01001A
Citaton Type	Serious
Standard Cited	19100038 D
Issuance Date	2024-08-23
Abatement Due Date	2024-09-30
Current Penalty	0.0
Initial Penalty	11524.0
Final Order	2024-09-17
Nr Instances	1
Nr Exposed	260
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.38(d): The employer did not have and maintain an employee alarm system with a distinctive signal for each purpose so that it complied with the requirements of 1910.165: (a) On or about March 4, 2024, and at times prior, the employer did not maintain an alarm system with distinctive signal for each purpose which complied with 29 CFR 1910.165. There is one overhead alarm sound and employees rely on radio communication to determine whether the emergency requires shelter-in-place or evacuation.
Citation ID	01001B
Citaton Type	Other
Standard Cited	19100165 B01
Issuance Date	2024-08-23
Abatement Due Date	2024-09-30
Current Penalty	11524.0
Initial Penalty	0.0
Final Order	2024-09-17
Nr Instances	1
Nr Exposed	20
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.165(b)(1): The employee alarm system did not provide warning for necessary emergency action as called for in the emergency action plan, or for reaction time for safe escape of employees from the workplace or the immediate work area, or both: (a) On or about March 4, 2024, and at times prior, Goodrich Corporation as the contract employer did not ensure that contract employees were provided warning for necessary emergency action as outlined in the emergency action plan. Contract employees do not carry radios, which is considered the primary method of communicating an emergency on the Goodrich Corporation facility. Contractors may work unsupervised in areas of the facility without means of emergency notification. Note: In small workplaces with 10 or less employees, direct voice communication (shouting) is an acceptable method for warning.

Inspection Type	Planned
Scope	NoInspection
Safety/Health	Health
Close Conference	2022-01-06
Emphasis	L: Aircraft, P: Aircraft
Case Closed	2022-01-06

Inspection Type	Planned
Scope	Partial
Safety/Health	Safety
Close Conference	2015-08-27
Emphasis	N: PSMPQV, P: PSMPQV
Case Closed	2015-12-10

Violation Items

Citation ID	01001
Citaton Type	Serious
Standard Cited	19100119 D02 I D
Issuance Date	2015-11-05
Abatement Due Date	2015-12-10
Current Penalty	0.0
Initial Penalty	4675.0
Final Order	2015-12-03
Nr Instances	1
Nr Exposed	5
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.119(d)(2)(i)(D): Information concerning the technology of the process did not include safe upper and lower limits for such items as temperatures, pressures, flows or compositions: 1) On August 24, 2015, and at prior times, the employers process safety information pertaining to the ethane system did not include safe upper pressure limits for the vaporizers. Calculations for the safe upper pressure limit for the vaporizers were based on the pressure rating of a flange which was not an integral part of the vaporizer.
Citation ID	01002A
Citaton Type	Serious
Standard Cited	19100119 D03 I B
Issuance Date	2015-11-05
Abatement Due Date	2015-12-10
Current Penalty	2500.0
Initial Penalty	4675.0
Final Order	2015-12-03
Nr Instances	3
Nr Exposed	5
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.119(d)(3)(i)(B): Process safety information pertaining to the equipment in the process did not include the piping and instrument diagrams (P&ID's): 1) On August 24, 2015, and at prior times, the P&ID was inaccurate or did not represent existing equipment that was a part of the process in the following instances: a) where the nitrogen pressure regulators for the ethane flow control valves located on the stanchions were not listed on the P&ID. b) where the 250 psi pressure safety valves (PSV 648A and PSV 648B), located at the second state regulator panel, were labeled set at 150 psi. c) where the nitrogen line pressure control valve (PCV 6420) was labeled set at 65 psi, which did not reflect current field settings.
Citation ID	01002B
Citaton Type	Serious
Standard Cited	19100119 L01
Issuance Date	2015-11-05
Abatement Due Date	2015-12-03
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2015-12-03
Nr Instances	1
Nr Exposed	5
Gravity	5
FTA Current Penalty	0.0
Citation text line	CFR 1910.119(l)(1): The employer did not establish and implement written procedures to manage changes to process chemicals, technology, equipment, and procedures; and, changes to facilities that affect a covered process: 1) On August 24, 2105, and at prior times, the employer did not ensure that management of change was conducted for a nitrogen regulator that was installed in February 2015 on the nitrogen gas line that is used to operate the ethane flow control valves.
Citation ID	01003
Citaton Type	Other
Standard Cited	19100119 L05
Issuance Date	2015-11-05
Abatement Due Date	2015-12-10
Current Penalty	2500.0
Initial Penalty	4675.0
Final Order	2015-12-03
Nr Instances	1
Nr Exposed	11
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.119(l)(5): Where a change covered by this paragraph resulted in a change in the operating procedures or practices required by paragraph (f) of this section, the employer did not ensure that such procedures or practices were updated accordingly: 1) On August 24, 2015, and at prior times, the employer did not ensure that standard operating procedures were updated due to a required management of change in the following instance: a) On February 24, 2014, the employer implemented a management of change related to the installation of a temperature monitor, alarm, and transmitter for the ethane line located after the second stage regulator. This device was installed to provide low temperature protection on the ethane system to protect the piping from any liquid ethane that might pass the vaporizers. The employer did not ensure that standard operating procedures were updated with changes due to this new device.

Inspection Type	Planned
Scope	Partial
Safety/Health	Safety
Close Conference	2009-05-22
Emphasis	N: AMPUTATE, S: AMPUTATIONS
Case Closed	2010-01-20

Violation Items

Citation ID	01001
Citaton Type	Other
Standard Cited	19100023 A08 I
Issuance Date	2009-07-14
Abatement Due Date	2009-08-28
Current Penalty	1125.0
Initial Penalty	1125.0
Nr Instances	1
Nr Exposed	1
Gravity	01
Citation ID	01002A
Citaton Type	Serious
Standard Cited	19100037 B04
Issuance Date	2009-07-14
Abatement Due Date	2009-08-28
Current Penalty	1500.0
Initial Penalty	1500.0
Nr Instances	4
Nr Exposed	4
Gravity	02
Citation ID	01002B
Citaton Type	Serious
Standard Cited	19100037 B06
Issuance Date	2009-07-14
Abatement Due Date	2009-08-28
Nr Instances	4
Nr Exposed	4
Gravity	02
Citation ID	01003
Citaton Type	Other
Standard Cited	19100212 A01
Issuance Date	2009-07-14
Abatement Due Date	2009-08-28
Current Penalty	1500.0
Initial Penalty	1500.0
Nr Instances	4
Nr Exposed	4
Gravity	02
Citation ID	01004
Citaton Type	Other
Standard Cited	19100219 C04 I
Issuance Date	2009-07-14
Abatement Due Date	2009-08-28
Current Penalty	1500.0
Initial Penalty	1500.0
Nr Instances	5
Nr Exposed	4
Gravity	02

Inspection Type	Complaint
Scope	Partial
Safety/Health	Health
Close Conference	2002-05-08
Case Closed	2002-05-08

Related Activity

Type	Complaint
Activity Nr	203483102
Health	Yes